New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors South Miami Heights pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Windows & Doors in Palmetto Bay, FL
Window installation in Palmetto Bay starts around $850 per opening for standard vinyl single-hung units and runs to $2,400 for large-format impact-rated assemblies, with most full-home jobs landing between $8,500 and $22,000 depending on frame type and glazing specification. Every replacement window and door installed here must carry a Miami-Dade Notice of Acceptance (NOA), a standard stricter than statewide Florida Product Approval that out-of-county contractors routinely miss. We measure every opening to the nearest 1/8 inch, document the frame condition with photos, and hand you the written price before any work begins. Call (786) 481-0414 to schedule your measured survey.
Why Palmetto Bay Homes Are Different
Palmetto Bay sits entirely within Miami-Dade County’s High Velocity Hurricane Zone (HVHZ), which means every replacement window and door must carry a Miami-Dade Notice of Acceptance (NOA) - a product-approval standard stricter than the statewide Florida Product Approval and unlike any requirement in neighboring Broward County. The village’s dense inventory of pre-1992 ranch and two-story CBS homes still fitted with original jalousie and single-pane aluminum windows is a primary driver of our work, as insurers are increasingly surcharging or non-renewing policies on homes that lack fully NOA-compliant impact openings.
Though several miles inland from Biscayne Bay, Palmetto Bay receives salt-laden air year-round that accelerates galvanic corrosion on aluminum frames and hardware - particularly on west-facing facades exposed to afternoon moisture. Marine-grade or thermally broken frames are the realistic minimum for longevity here. The village’s position in the southern Miami-Dade funnel means it sits directly in the historic landfall corridor for Atlantic hurricanes, making large-missile-rated glazing the practical and increasingly insurance-required standard for every opening. Contractors from outside Miami-Dade routinely get failed inspections in Palmetto Bay by installing windows that carry Florida Product Approval statewide but lack the separate Miami-Dade NOA stamp; the village’s building inspectors enforce the HVHZ dual-approval requirement strictly, and a non-NOA window already set in an opening must be removed and replaced at the contractor’s cost.
Before
AfterOur Main Palmetto Bay Services
Palmetto Bay homeowners call us most often for full-opening replacement of original aluminum windows and doors with NOA-compliant impact-rated assemblies, and for upgrading to energy-efficient glazing that lowers cooling loads in the village’s unshaded ranch homes.
Window Replacement in Palmetto Bay
Most Palmetto Bay window replacement jobs involve removing original jalousie or single-pane aluminum assemblies from 1960s-1980s CBS homes and installing NOA-compliant impact-rated vinyl or aluminum windows with proper sill pan flashing for the village’s flat-slab construction. We see recurring frame rot at the sill plate where original installations lacked end dams, and we document each condition with photos before quoting. Window Replacement in Palmetto Bay is governed by the same Haven Standard that applies to every measured survey we perform: the quote you receive is the document we build from.
Impact Windows & Doors in Palmetto Bay
Impact windows and doors are not optional in Palmetto Bay; they are the baseline for HVHZ compliance and increasingly for insurance continuation. We specify PGT and CGI large-missile-rated assemblies with Miami-Dade NOA stamps for every opening, from standard single-hung units to oversized sliding glass door systems. Impact Windows & Doors in Palmetto Bay must pass village inspection with the NOA documentation physically matched to the product label - we handle this verification before delivery, not after installation.
Sliding & Patio Doors in Palmetto Bay
Palmetto Bay’s ranch and split-level homes commonly feature 8- to 16-foot sliding glass door openings that originally used lightweight aluminum frames with single-pane glass - assemblies that fail both structurally and thermally. We replace these with multi-panel impact-rated systems from PGT or CGI, specifying thermally broken frames to resist salt-air corrosion and dual-point locking for wind-pressure resistance. Sliding & Patio Doors in Palmetto Bay requires precise sill pan integration with the existing concrete slab; our measured survey documents the exact threshold condition before we quote.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Window Installation in Palmetto Bay
Window installation in Palmetto Bay means working with pre-1992 CBS construction where original aluminum frames were set directly into concrete openings without proper sill pans or end dams, and where salt-laden air has corroded hardware and compromised thermal seals over decades. Most homeowners who call us are replacing jalousie banks, single-pane horizontal rollers, or failed sliding glass doors with NOA-compliant impact-rated assemblies that satisfy both village inspection and their insurance underwriter’s requirements. Window Installation at Sightline begins with the measured survey you keep, and the written quote cannot differ from that document.
Single & Double Hung Windows
Signs you need it
Original single-pane aluminum single or double hung windows show condensation between panes, corroded balances that prevent the sash from staying open, or visible daylight around the frame where the original caulk has separated from the CBS stucco.
What it costs in Palmetto Bay
Standard vinyl single-hung installation runs $850-$1,400 per opening; impact-rated aluminum double-hung with NOA compliance ranges $1,600-$2,400 depending on size and glazing specification.
How we do it
We remove the existing frame, inspect the rough opening for concrete spalls or moisture intrusion, install a sloped sill pan with sealed end dams, set the new window plumb and square, then foam-seal the perimeter before applying a paintable sealant compatible with the stucco finish.
Horizontal Roller Windows
Signs you need it
Roller windows that require shoulder force to slide, have cracked or missing rollers, or show frame racking where the salt-corroded track has deformed under repeated hurricane shutter installation and removal.
What it costs in Palmetto Bay
Standard horizontal roller replacement starts at $950-$1,550 per opening; impact-rated units with laminated glass and reinforced frames run $1,750-$2,600 for typical bedroom and living room sizes.
How we do it
We document the existing track condition with photos, remove the assembly without damaging the surrounding stucco, install the new roller unit with a continuous sill pan, verify smooth operation across the full travel, and seal with backer rod and polyurethane before the final inspection walkthrough.
What Window Installation Costs in Palmetto Bay
| Item | Typical range in Palmetto Bay |
|---|---|
| Standard vinyl single-hung window | $850 - $1,400 |
| Impact-rated aluminum double-hung | $1,600 - $2,400 |
| Impact-rated horizontal roller | $1,750 - $2,600 |
How long does window installation take in Palmetto Bay?
Most single-opening replacements complete in four to six hours; a full-home job of 15-25 openings typically spans three to five working days, with village inspection scheduled after the final unit is sealed and operational. Call (786) 481-0414 for a measured survey and written timeline.
Do you handle the NOA documentation for village inspection?
We verify the Miami-Dade Notice of Acceptance for every product before it leaves our warehouse, match the NOA number to the physical label on each window, and provide the documentation packet for your permit application and final inspection. Call (786) 481-0414 to review the specific NOA requirements for your opening schedule.
Door Installation in Palmetto Bay
Door installation in Palmetto Bay means replacing original aluminum-frame entries and patio sliders that predate the post-Hurricane Andrew code overhaul, often from homes built in the 1970s and 1980s where the threshold was set directly into the concrete slab without a pan flashing. Salt-air corrosion at the sill and jamb is the failure we document most often, along with single-pane glass that no longer meets HVHZ or insurance requirements. Door Installation through Sightline includes the measured survey of the rough opening, the written price, and the photo record of the completed assembly under the Haven Standard.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your front door shows rust staining at the threshold, the deadbolt no longer aligns with the strike plate due to frame racking, or your insurance underwriter has flagged the opening for non-compliance with HVHZ standards.
What it costs in Palmetto Bay
Impact-rated fiberglass entry door with NOA-compliant frame and hardware ranges $2,200-$4,500 installed; premium steel assemblies with multi-point locking and decorative glass inserts run $3,800-$6,200.
How we do it
We remove the existing frame and threshold, inspect the concrete sill for spalls or moisture paths, install a composite or aluminum pan flashing with end dams, set the pre-hung impact door plumb and level, shim the frame to the rough opening, then foam-seal and apply finish sealant before hardware adjustment and final photo documentation.
French & Double Doors
Signs you need it
Original French doors leak during driving rain, the astragal has separated from the active door, or the fixed panel shows stress cracks at the corner joints from wind pressure on single-pane glass.
What it costs in Palmetto Bay
Standard French door replacement with impact-rated laminated glass and reinforced frames runs $3,500-$5,800; oversized or custom-width assemblies with sidelite integration range $5,200-$8,400.
How we do it
We measure the total rough opening including sidelites, specify the assembly from PGT or CGI with verified NOA, coordinate delivery to avoid jobsite exposure, install with continuous sill pan and cap flashing, adjust the multi-point hardware for smooth latching, and document the operational test with photos.
What Door Installation Costs in Palmetto Bay
| Item | Typical range in Palmetto Bay |
|---|---|
| Impact-rated fiberglass entry door | $2,200 - $4,500 |
| Premium steel entry door with multi-point lock | $3,800 - $6,200 |
| Impact-rated French / double door | $3,500 - $5,800 |
Can you match my stucco finish after door replacement?
We cut the stucco with a masonry blade to minimize fracture, install the new frame with proper clearance, then apply a matching base coat and finish texture; we do not guarantee exact color match on aged stucco, but we document the repair with photos. Call (786) 481-0414 to discuss finish options during your measured survey.
Will the new door fit my existing alarm system contacts?
We note the location of magnetic contacts and wiring during the measured survey, coordinate with your alarm provider if needed, and install the new door to accept the original or upgraded contact placement without additional service calls. Call (786) 481-0414 to flag any integrated systems before we quote.
Energy-Efficient Windows in Palmetto Bay
Energy-efficient windows in Palmetto Bay address the specific thermal burden of pre-1992 CBS homes with unshaded west and south exposures, where original single-pane aluminum frames conduct heat directly into living spaces and drive cooling costs well above modern code baseline. The village’s inland position does not moderate afternoon temperatures; combined with salt-air corrosion that degrades original weatherstripping, the result is persistent air infiltration and solar heat gain that efficient glazing and thermally broken frames directly correct. Energy-Efficient Windows from Sightline are specified by U-factor and SHGC performance, not by margin, with written energy projections included in every quote.
Low-E & Argon Gas Glass
Signs you need it
Your west-facing rooms exceed 85 degrees by late afternoon despite air conditioning, or you can feel radiant heat through the glass while standing three feet from the window on a sunny day.
What it costs in Palmetto Bay
Low-E coating with argon gas fill added to standard vinyl window specification runs $120-$280 per opening above base cost; for impact-rated assemblies, the upgrade to high-performance Low-E with warm-edge spacer is $180-$340 per unit.
How we do it
We specify the appropriate Low-E coating for your exposure - Solar Control Low-E for west and south, High Solar Gain Low-E for north-facing openings - with argon fill and stainless steel or composite warm-edge spacer to reduce thermal bridging at the glass perimeter.
Insulated Laminated Glass
Signs you need it
You need both impact protection and thermal performance in a single assembly, or your current impact windows carry an outdated NOA with poor U-factor ratings that predate current energy code.
What it costs in Palmetto Bay
Insulated laminated impact glass with Low-E and argon, specified for HVHZ compliance, adds $220-$420 per opening above standard laminated impact glass; the upgrade typically pays back in 4-7 years on homes with heavy cooling loads.
How we do it
We specify a dual-pane insulated laminated unit with the impact layer on the interior lite, Low-E coating on surface #2 or #3 depending on climate zone, and argon fill verified at the factory; the NOA documentation confirms both impact rating and energy performance.
What Energy-Efficient Windows Costs in Palmetto Bay
| Item | Typical range in Palmetto Bay |
|---|---|
| Low-E + argon upgrade (standard vinyl) | $120 - $280 per opening |
| Low-E + argon upgrade (impact-rated) | $180 - $340 per opening |
| Insulated laminated impact glass upgrade | $220 - $420 per opening |
Will energy-efficient windows lower my FPL bill in Palmetto Bay?
Most homeowners see 12-22% reduction in cooling-season kilowatt hours after replacing single-pane aluminum with Low-E argon-filled impact windows, with the highest savings on unshaded west and south exposures common in Palmetto Bay’s ranch neighborhoods. Call (786) 481-0414 for a written energy projection based on your specific opening schedule.
Do energy-efficient windows still qualify for federal tax credits?
ENERGY STAR certified windows and doors with appropriate U-factor and SHGC ratings may qualify for federal tax credits under current IRS guidance; we provide the product certification documentation with your invoice, and you confirm eligibility with your tax preparer. Call (786) 481-0414 to discuss qualifying products during your measured survey.
Impact Garage Doors in Palmetto Bay
Impact garage doors in Palmetto Bay are increasingly required by insurance underwriters as a condition of policy continuation, particularly for homes with attached garages where the garage door is the largest unprotected opening in the building envelope. Original non-rated sectional doors from the 1970s and 1980s lack the wind-load resistance and debris-impact protection that the HVHZ demands; when they fail in a storm, the pressure differential can compromise the roof structure. Impact Garage Doors from Sightline carry Miami-Dade NOA stamps, are specified by design pressure rating for your exposure, and include the measured survey of the existing opening and hardware before we quote.
Hurricane-Rated Garage Doors
Signs you need it
Your insurance underwriter has issued a non-renewal notice citing the garage door, or your existing door lacks a visible wind-load sticker and was installed before 1994.
What it costs in Palmetto Bay
Standard 16-foot hurricane-rated steel sectional door with reinforced track and heavy-duty hardware runs $2,800-$4,500 installed; premium aluminum or composite impact-rated doors with insulated cores range $4,200-$6,800.
How we do it
We measure the opening width, height, and headroom, verify the existing track and spring system’s condition, specify the door and track assembly with the correct design pressure rating for your exposure, remove the old door, install the new track and hardware with proper anchoring to the CBS header, balance the spring tension, and test the automatic opener integration before final documentation.
Wind-Load Code Compliance
Signs you need it
Your garage door was replaced after 1994 but with a standard residential door that carries only Florida Product Approval, not the separate Miami-Dade NOA required for Palmetto Bay’s HVHZ classification.
What it costs in Palmetto Bay
Full replacement of a non-compliant door with NOA-certified wind-load assembly, including track, hardware, and permit-ready documentation, ranges $3,200-$5,400 for typical two-car openings; single-car openings run $2,400-$3,800.
How we do it
We verify the existing door’s approval status against village requirements, specify the correct NOA assembly from our manufacturer lines, pull the permit with the product documentation, install to the manufacturer’s HVHZ anchoring schedule, and coordinate the village inspection with the NOA certificate present at the jobsite.
What Impact Garage Doors Costs in Palmetto Bay
| Item | Typical range in Palmetto Bay |
|---|---|
| Hurricane-rated steel sectional door (16 ft) | $2,800 - $4,500 |
| Premium aluminum/composite impact door | $4,200 - $6,800 |
| Wind-load code compliance replacement | $3,200 - $5,400 |
Can I keep my garage door opener with a new impact door?
Most standard openers can be reinstalled on a new impact-rated door if they are in good working condition and rated for the increased door weight; we test the opener during our measured survey and note any recommended upgrades in the written quote. Call (786) 481-0414 to schedule the survey and opener evaluation.
How do I know if my current garage door is NOA-compliant?
Look for a Miami-Dade Notice of Acceptance label on the door interior or track assembly; if you find only a Florida Product Approval number, or no label at all, the door does not meet Palmetto Bay’s HVHZ requirement and must be replaced for permit compliance. Call (786) 481-0414 and we will verify the label during our free second-opinion review.
Custom & Geometric Windows in Palmetto Bay
Custom and geometric windows in Palmetto Bay solve the design and compliance challenges of the village’s architecturally varied homes, from mid-century ranch plans with clerestory bands to Mediterranean-influenced two-story entries with arched transoms. These openings cannot accept standard rectangular units without destroying the original design intent, yet they still must carry Miami-Dade NOA approval and meet HVHZ impact standards. Custom & Geometric Windows from Sightline are drawn from manufacturer lines including PGT and CGI that maintain NOA-certified custom programs, with every unit measured, templated, and documented before fabrication begins.
Arched & Curved Windows
Signs you need it
Your arched transom or curved window has developed seal failure visible as condensation between panes, or the original single-pane arched unit was never impact-rated and now blocks your insurance renewal.
What it costs in Palmetto Bay
Custom arched vinyl or aluminum window with impact-rated laminated glass and NOA certification ranges $1,800-$3,200 for typical transom sizes; full-height arched units or compound curves with integrated mullions run $3,500-$6,400.
How we do it
We create a physical template or 3D laser measurement of the existing arched opening, submit the dimensions to the manufacturer’s custom NOA program for engineering verification, fabricate the unit with the specified glazing and frame finish, and install with a custom-curved sill pan and arch-top trim kit that matches the original profile.
Oversized Openings
Signs you need it
You are combining multiple smaller windows into a single large opening for a view or ventilation goal, or your existing oversized window has exceeded the manufacturer’s size limit for standard replacement and requires custom engineering.
What it costs in Palmetto Bay
Custom oversized impact-rated window assemblies, engineered for the specific span and design pressure, range $4,500-$9,200 depending on dimensions, glazing specification, and required reinforcement; mullion-free corner units or direct-glaze systems command the upper end.
How we do it
We engage a structural engineer if the opening modification requires header verification, specify the custom unit from the manufacturer’s NOA program with signed engineering calculations, coordinate crane or specialized handling for units exceeding 150 pounds, install with reinforced anchoring to the CBS structure, and document the structural connection and operational test with photos.
What Custom & Geometric Windows Costs in Palmetto Bay
| Item | Typical range in Palmetto Bay |
|---|---|
| Custom arched window (transom size) | $1,800 - $3,200 |
| Full-height arched or compound curve | $3,500 - $6,400 |
| Custom oversized impact assembly | $4,500 - $9,200 |
How long does a custom window take to fabricate?
Custom geometric and oversized units typically require 8-14 weeks from measured survey to delivery, depending on the manufacturer’s current NOA program queue and any required engineering submittal; we provide a written production schedule with your quote and update you at fabrication milestones. Call (786) 481-0414 to begin the templating process.
Will a custom window still pass village inspection in Palmetto Bay?
Every custom unit we specify carries a Miami-Dade NOA specific to the custom product line, with the NOA number traceable to the physical label on your window; we submit this documentation with your permit application and present it at inspection. Call (786) 481-0414 to review the NOA verification process for your custom opening.
Brands We Service in Palmetto Bay
We draw from eight verified manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - specified by performance tier and price range, not by margin. For Palmetto Bay’s HVHZ requirements, we stock PGT and CGI impact-rated frames and hardware locally to maintain turnaround on standard replacements. our brands page lists the full product matrix by opening type and performance specification.
Pricing for Windows & Doors in Palmetto Bay, FL
| Service | Typical range in Palmetto Bay |
|---|---|
| Standard vinyl single-hung window | $850 - $1,400 |
| Impact-rated aluminum double-hung | $1,600 - $2,400 |
| Impact-rated horizontal roller | $1,750 - $2,600 |
| Impact-rated fiberglass entry door | $2,200 - $4,500 |
| Premium steel entry door with multi-point lock | $3,800 - $6,200 |
| Impact-rated French / double door | $3,500 - $5,800 |
| Low-E + argon upgrade (standard vinyl) | $120 - $280 per opening |
| Low-E + argon upgrade (impact-rated) | $180 - $340 per opening |
| Insulated laminated impact glass upgrade | $220 - $420 per opening |
| Hurricane-rated steel sectional door (16 ft) | $2,800 - $4,500 |
| Premium aluminum/composite impact garage door | $4,200 - $6,800 |
| Custom arched window (transom size) | $1,800 - $3,200 |
Prices in Palmetto Bay push toward the upper end when openings require concrete repair, header reinforcement, or custom stucco matching after frame removal; homes with original jalousie banks converted to standard rectangular openings also add rough-in labor. The written price you receive before any work starts is the final price - Haven Clause 1 permits no change orders for conditions we should have found in the measured survey.
Neighborhoods We Serve in Palmetto Bay
We serve the full village of Palmetto Bay from our South Florida office, with crews dispatched to all residential neighborhoods. Most measured surveys are scheduled within 48 hours of contact, and we coordinate village permit submittal from our office to avoid homeowner queue time.
- Old Cutler area
- Palmetto Bay Estates
- East Ridge
- Deering Bay vicinity
- Thalatta Estates
Service Area - Cities Near Palmetto Bay
Our crews work throughout southern Miami-Dade County, with Palmetto Bay as a core service area. We also schedule measured surveys and installations in South Miami Heights, FL, Goulds, FL, Palmetto Estates, FL, and Richmond West, FL. Dispatch and scheduling are coordinated from our Miami office; crews serve Palmetto Bay locally with no subcontracted labor.
Serving Palmetto Bay, FL - Our Local Coverage Area
We’re based in the Palmetto Bay area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Palmetto Bay
Palmetto Bay building permit review for window and door replacement typically takes 5-10 business days for complete applications with verified NOA documentation; we prepare and submit the permit packet from our office as part of our standard process, and we coordinate inspection scheduling once the work is complete.
Some Palmetto Bay neighborhoods with active HOAs require architectural review before exterior modification; we provide the product cut sheets, color samples, and NOA documentation needed for your HOA submittal, though you remain responsible for obtaining the association’s written approval before we schedule installation.
We have never had a Palmetto Bay installation fail final inspection for product compliance because we verify the Miami-Dade NOA before delivery and present the documentation at inspection; if a rare field condition triggers a correction notice, we address it under the 365-Day Done Right Promise at no additional cost.
Call (786) 481-0414 to schedule your free measured survey. Every quote is written, every crew is verified, and every job leaves a documented photo record under the Haven Standard.
Six Reasons Homeowners Choose Sightline Windows & Doors South Miami Heights
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors South Miami Heights Services
What Neighbors Say About Sightline Windows & Doors South Miami Heights
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Palmetto Bay Customers Say
"Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H.